Heavy electromagnetic feeder, bottom-mounted drive — 3D drawing

Representative 3D drawing for this feeder design

Vibrating feeder ПЭВФ 950/550х2000-90

Electromagnetic vibrating feeder, heavy feeders, bottom-mounted drive · drive ВЭМ-Т2

The PEVF 950/550х2000-90 differs from its neighbours in the 950 mm range by the second designation figure — 550 instead of 370 mm. The trough is 950 × 2000 mm, throughput up to 90 m³/h and lump size up to 250 mm. Coil current up to 14 A and voltage 0–315 V are higher than on the 370 models of the same range. Mass is 1600 kg with dimensions within 2440×1180×1285 mm and a bottom-mounted VEM-T2 drive.

Tray width / length	950 × 2000 mm
Max. capacity*	90 m³/h
Max. lump size	250 mm
Tray design	Open
Tray material	Сталь 09Г2С (опция футеровки Hardox 400/450)
Drive type	Electromagnetic, однотактный, ВЭМ-Т2
Drive position	Нижнее
Power supply	380 V, 50 Hz
Coil voltage range	0–315 V
Coil current, max	14 A
Dimensions (L×W×H), max	2440×1180×1285 mm
Mass (excl. isolators & controller)	1600 kg

* Capacity measured on dry sand (bulk density 1.52 kg/dm³) at standard tray incline; adjustable from zero to maximum via the control unit.

📄 Technical datasheet (PDF) 📐 Installation drawing (PDF)

Supply terms: 2–4 weeks lead time, 12-month warranty from the shipment date. details →

Need this model or something similar?

We reply within one business day

Request a quote

Selection questionnaire
Fill in the material parameters and required capacity — this lets us size a model and quote it faster and more accurately. Download PDF →

Where it is used

Discharging coarse rock up to 250 mm where the layout calls for a larger second trough dimension, which helps when material travels in a deep layer.
Feeding a crusher at up to 90 m³/h with a deep material layer on the trough; current to 14 A and voltage to 315 V are allowed for when selecting the cabinet.
Stations that can accommodate the 1285 mm height, noticeably greater than on the 370 models of the range — check it before ordering, not at installation.
Working under a bin with heavy loading in a version with a higher-current drive arrangement, where the current margin is designed in for exactly that duty.

How it differs from neighbouring models

ПЭВФ 950/370х2000-90 — та же длина лотка и тот же поток, но второй размер 370 мм, ток 12 А и масса 1400 кг
ПЭВФ 950/370х2500-90 — лоток длиннее — 2500 мм, масса 1700 кг
ПЭВФ 700/550х1800-60 — на ступень ниже по ширине: 700 мм, 60 м³/ч, крупность до 160 мм

Questions and answers

How does it differ from the PEVF 950/370х2000-90?

By the second designation figure and the electrical side: 550 mm against 370 mm, coil current up to 14 A against 12 A, voltage 0–315 V against 0–300 V, and 1600 kg against 1400 kg. The 950 × 2000 mm trough, 90 m³/h and the 250 mm lump size are the same.

What is its height?

Within 1285 mm against 1070 mm for the 370 model of the same range. This has to be checked on site during layout.

What control does it need?

A ШУВ cabinet or БУВ unit regulating coil voltage over 0–315 V at up to 14 A, supply 380 V, 50 Hz.