Heavy electromagnetic feeder, bottom-mounted drive — 3D drawing

Representative 3D drawing for this feeder design

Vibrating feeder ПЭВФ 1500/460х2500-300

Electromagnetic vibrating feeder, heavy feeders, bottom-mounted drive · drive ВЭМ-Т4

The PEVF 1500/460х2500-300 is the largest model in the range: a 1500 × 2500 mm trough, maximum throughput 300 m³/h and a lump size up to 400 mm. In trough width, in flow and in permissible lump it is the maximum across our feeders. The bottom-mounted VEM-T4 drive takes coil current up to 16 A at 0–310 V. Mass is 2600 kg, dimensions within 3150×1820×1400 mm, and output is adjusted smoothly by the control cabinet from zero to maximum.

Tray width / length	1500 × 2500 mm
Max. capacity*	300 m³/h
Max. lump size	400 mm
Tray design	Open
Tray material	Сталь 09Г2С (опция футеровки Hardox 400/450)
Drive type	Electromagnetic, двухтактный, ВЭМ-Т4
Drive position	Нижнее
Power supply	380 V, 50 Hz
Coil voltage range	0–310 V
Coil current, max	16 A
Max. input current	25 A
Dimensions (L×W×H), max	3150×1820×1400 mm
Mass (excl. isolators & controller)	2600 kg

* Capacity measured on dry sand (bulk density 1.52 kg/dm³) at standard tray incline; adjustable from zero to maximum via the control unit.

📄 Technical datasheet (PDF) 📐 Installation drawing (PDF)

Supply terms: 2–4 weeks lead time, 12-month warranty from the shipment date. details →

Need this model or something similar?

We reply within one business day

Request a quote

Selection questionnaire
Fill in the material parameters and required capacity — this lets us size a model and quote it faster and more accurately. Download PDF →

Where it is used

Feeding primary crushing at a quarry where flow is measured in hundreds of cubic metres per hour and lumps reach 400 mm.
A receiving bin under quarry tipper discharge: a trough a metre and a half wide takes the entire discharge front.
The head station of a crushing and screening plant, where feeder throughput sets the throughput of the whole line.
Handling heavy rock that the 1200 and 1400 mm models cannot take on permissible lump size. On plants like these the feeder runs as a single line with no standby, and its rating determines the throughput balance of the whole site.

How it differs from neighbouring models

ПЭВФ 1400/380х2550-250 — на ступень ниже: 1400 мм, 250 м³/ч, крупность до 380 мм при той же массе 2600 кг
ПЭВФ 1200/550х2500-150 — 1200 мм и 150 м³/ч — вдвое меньший поток при той же массе
ПЭВФ 950/390х3000-90 — ширина 950 мм и 90 м³/ч, но самый длинный лоток в тяжёлой серии — 3000 мм

Questions and answers

Is this the highest-throughput model?

Yes. 300 m³/h is the maximum in our range, as are the 1500 mm trough width and the 400 mm lump size. The next step down is the PEVF 1400/380х2550-250 at 250 m³/h.

What drive and supply does it use?

A bottom-mounted VEM-T4 drive, supply 380 V, 50 Hz, coil voltage 0–310 V and coil current no more than 16 A. Output is adjusted smoothly by the control cabinet from zero to maximum.

What should the layout allow for?

Dimensions within 3150×1820×1400 mm and a mass of 2600 kg excluding vibration isolators and the control unit. At 1820 mm the width is the largest in the range and has to be checked on site.