Heavy electromagnetic feeder, bottom-mounted drive — 3D drawing

Representative 3D drawing for this feeder design

Vibrating feeder ПЭВФ 1200/410х2200-150

Electromagnetic vibrating feeder, heavy feeders, bottom-mounted drive · drive ВЭМ-Т2

The PEVF 1200/410х2200-150 is a heavy-duty feeder with a 1200 × 2200 mm trough, throughput up to 150 m³/h and a lump size up to 320 mm. By trough length it is the middle option of the 1200 mm range, between the 2000 mm model and the 2500 mm versions. The bottom-mounted VEM-T2 drive takes coil current up to 13 A at 0–310 V, supply 380 V, 50 Hz. Mass is 1600 kg, dimensions within 2500×1530×1140 mm.

Tray width / length	1200 × 2200 mm
Max. capacity*	150 m³/h
Max. lump size	320 mm
Tray design	Open
Tray material	Сталь 09Г2С (опция футеровки Hardox 400/450)
Drive type	Electromagnetic, однотактный, ВЭМ-Т2
Drive position	Нижнее
Power supply	380 V, 50 Hz
Coil voltage range	0–310 V
Coil current, max	13 A
Dimensions (L×W×H), max	2500×1530×1140 mm
Mass (excl. isolators & controller)	1600 kg

* Capacity measured on dry sand (bulk density 1.52 kg/dm³) at standard tray incline; adjustable from zero to maximum via the control unit.

📄 Technical datasheet (PDF) 📐 Installation drawing (PDF)

Supply terms: 2–4 weeks lead time, 12-month warranty from the shipment date. details →

Need this model or something similar?

We reply within one business day

Request a quote

Selection questionnaire
Fill in the material parameters and required capacity — this lets us size a model and quote it faster and more accurately. Download PDF →

Where it is used

Discharging coarse ore up to 320 mm from the receiving bin of a crushing plant, carrying it a little over two metres.
Feeding a crusher at up to 150 m³/h where the 2000 mm model falls short on reach but the three-metre footprint of the 2500 mm version will not fit the station.
Working under a bin loaded by tipper, where the flow has to be spread across the full 1200 mm trough width.
Replacing a worn heavy feeder in a frame rated for around a tonne and a half: 1600 kg fits where 2600 kg would require reinforcement. On the frame side that is often the deciding argument between the mid and long options of the range.

Questions and answers

How does it differ from the PEVF 1200/410х2000-150?

Only in trough length: 2200 mm against 2000 mm. Width of 1200 mm, 150 m³/h, the 320 mm lump size, the VEM-T2 drive with current up to 13 A and the 1600 kg mass are the same. Overall length is 2500 mm against 2400 mm.

When choose this size rather than the 2500 mm one?

When reach of a little over two metres is needed, the station cannot take a three-metre footprint, and it is preferable to stay at 1600 kg on the frame rather than the 1700–2600 kg of the 2500 mm versions.

How is the feed rate controlled?

Coil voltage is adjusted from 0 to 310 V by the control cabinet, varying output from zero to 150 m³/h. The 150 m³/h figure is the maximum, measured on dry sand.