Light electromagnetic feeder, open tray — 3D drawing

Representative 3D drawing for this feeder design

Vibrating feeder ПЭВ 600/300х1600-50

Electromagnetic vibrating feeder, light feeders, open tray · drive ВЭМ-Л4

The ПЭВ 600/300х1600-50 has an open trough of 600 × 1600 mm, a maximum throughput of 50 m³/h and a lump size up to 120 mm. The 600 mm width is an intermediate step between the 500 and 700 mm models, and the lump size is intermediate too: 120 mm against 90 mm for the 500s and 160 mm for the 700s. The ВЭМ-Л4 drive is bottom-mounted, current up to 9 A, mass 400 kg, dimensions within 1840×820×860 mm.

Tray width / length	600 × 1600 mm
Max. capacity*	50 m³/h
Max. lump size	120 mm
Tray design	Open
Drive type	Electromagnetic, однотактный, ВЭМ-Л4
Drive position	Нижнее
Power supply	380 V, 50 Hz
Coil voltage range	0–300 V
Coil current, max	9 A
Dimensions (L×W×H), max	1840×820×860 mm
Mass (excl. isolators & controller)	400 kg

* Capacity measured on dry sand (bulk density 1.52 kg/dm³) at standard tray incline; adjustable from zero to maximum via the control unit.

📄 Technical datasheet (PDF) 📐 Installation drawing (PDF)

Supply terms: 2–4 weeks lead time, 12-month warranty from the shipment date. details →

Need this model or something similar?

We reply within one business day

Request a quote

Selection questionnaire
Fill in the material parameters and required capacity — this lets us size a model and quote it faster and more accurately. Download PDF →

Where it is used

Feeding crushed material up to 120 mm where the lump is too large for a 500 mm width but a 700 mm feeder would be excessive in throughput.
Feeding a screen or conveyor at up to 50 m³/h with material spread evenly across the full trough width rather than concentrated down the centre.
Working under a bin with an unstable fraction where individual lumps reach 120 mm and a narrower trough starts to bridge.
Replacing a 500 mm wide feeder in a station where hang-ups began after the lump size grew following a change of material source. Throughput stays the same and the bridging at the trough inlet stops.

How it differs from neighbouring models

ПЭВ 700/315х1600-60 — та же длина лотка, но ширина 700 мм, крупность до 160 мм и поток 60 м³/ч
ПЭВ 500/450х1600-50 — тот же поток 50 м³/ч и та же длина, ширина 500 мм и крупность до 90 мм
ПЭВ 500/300х1600-30 — та же длина при 30 м³/ч и массе 290 кг

Questions and answers

When should a 600 mm width be chosen over 500 or 700?

When the lump size exceeds 90 mm but does not reach 160 mm. The 600 mm width is rated for lumps up to 120 mm at 50 m³/h — an intermediate step between the two neighbouring sizes.

How does it differ from the ПЭВ 700/315х1600-60?

In trough width, lump size and throughput: 600 mm, 120 mm and 50 m³/h against 700 mm, 160 mm and 60 m³/h. The 1600 mm trough length, the ВЭМ-Л4 drive and the 400 kg mass are the same.

What are the dimensions and mass?

Dimensions within 1840×820×860 mm and a mass of 400 kg excluding vibration isolators and the control unit.