Light electromagnetic feeder, covered tray — 3D drawing

Representative 3D drawing for this feeder design

Vibrating feeder ПЭВУ 180/110х940-6

Electromagnetic vibrating feeder, light feeders, covered tray · drive ВЭМ-Л2

The PEVU 180/110х940-6 is a narrow covered-trough feeder 940 mm long at 180 mm wide. Throughput reaches 6 m³/h with a lump size up to 36 mm. It differs from the half-metre model of the same width in its ВЭМ-Л2 drive taking up to 5 A and a mass of 135 kg against 32 kg: a longer trough calls for a stronger drive. Dimensions are within 1210×470×500 mm, supply 380 V, 50 Hz. Lump size and flow stay as on the short model.

Tray width / length	180 × 940 mm
Max. capacity*	6 m³/h
Max. lump size	36 mm
Tray design	Covered
Drive type	Electromagnetic, однотактный, ВЭМ-Л2
Drive position	Нижнее
Power supply	380 V, 50 Hz
Coil voltage range	0–250 V
Coil current, max	5 A
Dimensions (L×W×H), max	1210×470×500 mm
Mass (excl. isolators & controller)	135 kg

* Capacity measured on dry sand (bulk density 1.52 kg/dm³) at standard tray incline; adjustable from zero to maximum via the control unit.

📄 Technical datasheet (PDF) 📐 Installation drawing (PDF)

Supply terms: 2–4 weeks lead time, 12-month warranty from the shipment date. details →

Need this model or something similar?

We reply within one business day

Request a quote

Selection questionnaire
Fill in the material parameters and required capacity — this lets us size a model and quote it faster and more accurately. Download PDF →

Where it is used

Carrying fine dusty material nearly a metre in an enclosed path, with spillage ruled out by the enclosure itself.
Feeding powders and fine fractions into a vessel standing away from the loading point, with the narrow 180 mm stream held across the full trough length.
Stations where a narrow stream has to pass under an enclosure through the whole service area without stopping the feed.
Replacing a narrow open feeder where the site has come to require a closed feed path; mounting dimensions are close, so frame rework is usually unnecessary.

How it differs from neighbouring models

ПЭВУ 180/100х500-6 — короткий вариант: лоток 500 мм, привод ВЭМ-Л1, масса всего 32 кг
ПЭВ 180/100х600-6 — открытое исполнение той же ширины и того же потока
ПЭВУ 360/215х940-25 — та же длина лотка, но ширина 360 мм и поток 25 м³/ч

Questions and answers

Why is this model four times heavier than the PEVU 180/100х500-6?

Trough length and drive. At 940 mm it needs a ВЭМ-Л2 drive taking up to 5 A instead of a ВЭМ-Л1 at 1.5 A, and the supporting structure changes with it: 135 kg against 32 kg.

What lump size is permissible?

No more than 36 mm — set by the 180 mm trough width. For material up to 50 mm you need a trough 250–360 mm wide.

Does throughput change with trough length?

No, both 180 mm wide models are rated at 6 m³/h. Length governs how far the material has to be carried.