Light electromagnetic feeder, special design — 3D drawing

Representative 3D drawing for this feeder design

Vibrating feeder ПЭВНМ 250/140х400-6

Electromagnetic vibrating feeder, light feeders, special design · drive ВЭМ-Л1

The ПЭВНМ 250/140х400-6 differs from its neighbour in the same group by the second figure of the designation — 140 instead of 100 mm. The trough is 250 × 400 mm, throughput up to 6 m³/h, lump size up to 50 mm and mass 32 kg. Dimensions are within 550×330×350 mm, making it the shortest feeder in the range. The bottom-mounted ВЭМ-Л1 drive takes up to 1.5 A at a coil voltage of 0–250 V.

Tray width / length	250 × 400 mm
Max. capacity*	6 m³/h
Max. lump size	50 mm
Tray design	Open
Drive type	Electromagnetic, однотактный, ВЭМ-Л1
Drive position	Нижнее
Power supply	380 V, 50 Hz
Coil voltage range	0–250 V
Coil current, max	1.5 A
Dimensions (L×W×H), max	550×330×350 mm
Mass (excl. isolators & controller)	32 kg

* Capacity measured on dry sand (bulk density 1.52 kg/dm³) at standard tray incline; adjustable from zero to maximum via the control unit.

📄 Technical datasheet (PDF) 📐 Installation drawing (PDF)

Supply terms: 2–4 weeks lead time, 12-month warranty from the shipment date. details →

Need this model or something similar?

We reply within one business day

Request a quote

Selection questionnaire
Fill in the material parameters and required capacity — this lets us size a model and quote it faster and more accurately. Download PDF →

Where it is used

Feeding bulk material over the shortest run in the range — overall length is just 550 mm, the smallest of any feeder we build.
Metering components in a cramped station with under a metre of length available, without reworking it for longer equipment.
Supplying packing or weighing equipment in small portions of up to 6 m³/h, with output adjustable smoothly from zero for dose repeatability.
Pilot installations where a 32 kg feeder is moved between rigs by hand, with no lifting equipment needed for installation.

How it differs from neighbouring models

ПЭВНМ 250/100х400-6 — тот же лоток и тот же поток, второй размер 100 мм вместо 140 мм
ПЭВНМ 200/70х600-4 — поток 4 м³/ч, лоток длиннее — 600 мм, крупность до 36 мм
ПЭВНМ 360/160х1000-16 — старшая модель группы: 16 м³/ч, лоток 1000 мм, масса 135 кг

Questions and answers

How does it differ from the ПЭВНМ 250/100х400-6?

By the second figure of the designation: 140 mm against 100 mm. Trough width and length of 250 × 400 mm, 6 m³/h, the 50 mm lump size, the ВЭМ-Л1 drive and the 32 kg mass are identical. Dimensions differ: 550×330×350 mm against 560×330×300 mm.

How little space does it take?

Overall length of 550 mm is the smallest across our feeders, with 350 mm of height and 330 mm of width.

What lump size is permissible?

No more than 50 mm at a throughput of up to 6 m³/h.