Representative 3D drawing for this feeder design
Electromagnetic vibrating feeder, light feeders, special design · drive ВЭМ-Л1
The ПЭВНМ 200/70х600-4 is the lowest-throughput feeder in the range: 4 m³/h on a 200 × 600 mm trough. Lump size is up to 36 mm, mass 32 kg and dimensions within 760×300×250 mm. The bottom-mounted ВЭМ-Л1 drive draws no more than 1.5 A from a 380 V, 50 Hz supply, with coil voltage adjustable from 0 to 250 V so that output varies smoothly from zero to the full 4 m³/h.
| Tray width / length | 200 × 600 mm |
| Max. capacity* | 4 m³/h |
| Max. lump size | 36 mm |
| Tray design | Open |
| Drive type | Electromagnetic, однотактный, ВЭМ-Л1 |
| Drive position | Нижнее |
| Power supply | 380 V, 50 Hz |
| Coil voltage range | 0–250 V |
| Coil current, max | 1.5 A |
| Dimensions (L×W×H), max | 760×300×250 mm |
| Mass (excl. isolators & controller) | 32 kg |
* Capacity measured on dry sand (bulk density 1.52 kg/dm³) at standard tray incline; adjustable from zero to maximum via the control unit.
Yes, 4 m³/h is the minimum. The nearest special-design models are rated for 6 m³/h and the largest in the group for 16 m³/h.
No more than 36 mm. The ПЭВНМ models 250 and 360 mm wide go up to 50 mm.
A ШУВ cabinet or БУВ unit: coil voltage adjusts from 0 to 250 V at no more than 1.5 A, varying output smoothly from zero to 4 m³/h.
We do not publish prices: cost is calculated for the specific duty — tray design and lining, control cabinet or unit, climatic version, batch size and delivery terms. Send us the material parameters and the throughput you need.